DV cabinets

DV blast cabinet is equipped with a front lift door with air springs, which enables the installation of the cabinet in a smaller room. Front opening door enables loading and unloading of heavier parts by a fork lifter or by a crane.

Blast DV cabinet housing is made from powder painted sheet metal and has a front lift door with air springs for easy loading of workpieces. The tilt-out window is designed for tool-free glass change in minutes and equipped with fluorescent light for best visibility. Front openings for hand access are equipped with two layers of rubber sealing flaps. Galvanized steel gratings in the working area provide the best support for even heavier parts up to 300 kg. Blasting is foot operated and interrupted by a safety switch if the door is opened.

BLAST DV cabinets can be equipped either with injector or pressure blasting system and optionally connected to dust collectors with or without cyclone for abrasive recycling.

Actual space requirement for a complete system depends on the equipment configuration, options and requested workflow. Care also about additional workspace for the operator and for maintenance access.

The DV-cabinets are available in 3 standard sizes – BLAST DV 1, 2, 3.

	Blast 1 DV	Blast 2 DV	Blast 3 DV
Outside dimensions (mm)	850 x 600 x 1600	1200 x 800 x 1700	1450 x 1000 x 1800
Working area (mm)	800 x 550 x 750	1150 x 750 x 850	1400 x 950 x 950
Cabinet weight, empty	115	150	160
Max. workpiece weight	300 kg	300 kg	300 kg
Electrical connection	220 V, 50 Hz

BLAST DV cabinets can be optionally equipped with the rotating drum for blasting of small parts

BLAST DV cabinets can be customized with many optional accessories like:

50 mm or 120 mm diameter suction connection
Air pressure regulator with filter
Blast guns type INJ 1 K, ANI or POWER GUN for injector blast system
Wolfram-carbide or boron carbide nozzles
Air pressure regulator with filter
Blow-off (blowing) gun
Blast gun holder
Inside rubber lining

Rubber/plastic blast gloves
Metal ring for glove attachment
Manual turntable VM
120 mm suction connection with PU lining
left side door
openings on the doors for longer workpieces
carriage on rails in/out -500 kg capacity
additional light on the cabinet's ceiling

Common applications:

Remove rust, mill scale, heat treatment scale, and carbon build-up from metals
Strip paint, powder coating, plating, and anodizing from parts for rework
Eliminate burrs, parting lines, flashes, and other defects from castings and injection-molded parts
Remove residual sand from castings
Beautify steel, stainless steel, aluminum, brass and other metals with a uniform satin finish
Etch artwork and apply lettering on glass, stone, plastics, metal and other materials
Clean release agents and material build-up from moulds